Monday 3 October 2011

Saw blades to Finland

Just Finished a nice pair of saw blades going toFinland.

Tristan wanted a large Ripper and a X cut to match.  The rip is 29" long, as Tristan has a long stroke length, while the X cut is 2" shorter.

The Spec on the rip is:

4" of 5 ppi
5" of 4.5 ppi
6" of 4 ppi
3.5 ppi for the rest of the saw.

The X cut is 6ppi for the entire length.


Tristan wants to make his own handles, so I've included a couple of American Black Walnut blanks for him play with.

The next pair of saws on the list will be heading off to the USA.


8 comments:

  1. Very cool nibs on your saws! I really like those.

    ReplyDelete
  2. Hi Lui,

    did you taper grind the blades?

    Cheers Pedder

    ReplyDelete
  3. Hi Pedder,

    Yes, they were taper ground.

    What was an issue, was the lack of a handle to test the cutting and set of the blades. Tristan has tried the rip and he says it's running true.

    Cheers

    lui

    ReplyDelete
  4. I would love to see a tutorial on how to make a back Saw I'm sure a lot of other people would to

    ReplyDelete
  5. I truly get pleasure from while I read your blogs and its content.
    sawspecialists.com/best-miter-saw-reviews/

    ReplyDelete
  6. Here at this site really the fastidious material collection so that everybody can enjoy a lot.
    http://sawspecialists.com/best-band-saw-reviews/

    ReplyDelete
  7. It’s amazing to visit again n again coming to your blogs the superb effort is here.
    http://sawspecialists.com/best-miter-saw-reviews/

    ReplyDelete
  8. Be sure the process is comfortable and relatively easy to do. A saw in which the arm can be raised and which holds itself in this position is most desirable as it makes this process much easier as do tool-less blade holders. power tools

    ReplyDelete